Live and Webcast Auction

Austin-Westran, LLC

Complete Auction of Metal Fabricating Machinery and Facility Equipment in Byron, Illinois 



Type of Auction:

Onsite and Live Webcast 

Auction Date and Time:

March 7, 2017​; 10:00 AM CST

Inspection Date and Time:

March 6, 2017​; 9:00 AM - 4:00 PM CST

Removal Dates:



602 E. Blackhawk Drive

Byron, Illinois 61010

Map and Directions

Type of Assets/Lots:

Hundreds of lots of metal fabricating equipment, including CNC turret punches, panel benders, press brakes, punch presses, shears, straight side press, notchers, engine lathes, manual brakes and rolls, drill presses, surface grinders, bandsaws, bridge/gantry cranes, as well as plant support and facility items such as floor scrubbers, stretch wrap machines, coolers, welders, and compactors. See Lot Book on Bidspotter for complete asset listing and photos.  

Payment Information:

Payment is due within 24 hours. Cash, wire transfer, cashier’s check, or company check with a bank letter of guarantee are all acceptable forms of payment. 

Buyers Premium:

For onsite buyers, a 15% premium will be applied to purchase total. For webcast buyers, an 18% premium will be applied to purchase total. 

Lot Book and Webcast Auction Platform:

Lot Book and simulcast online auction provided by Bidspotter. View lot book and register to participate in the live and online auction here.

Auction Contact:

For questions regarding assets or auction registration, please contact Director of Auction Services Burdette Wilber at (314) 616-8422 or



Amada CNC Turret Punch (2004)

  • Model #: EM 2510NT

  • Specifications: 20-Ton, 45-Station CNC Turret Punch with Fanuc PC Base Computer with CRT, 45 Tool Turret with 4 Indexing Stations, 50" x 100" Sheet Size, Ball Transfer/Brush Top Table with Automatic Sheet Re-positioning with Gripper Arms, 6 Shelf Tower with Auto Load/Unload​

Amada CNC Turret Punch (1997)

  • Model #: PEGA-S358

  • Specifications: 30-Ton CNC Turret Punch (1997) with Amada 04P CNC/CRT Control with Color Monitor and Graphics, 58-Station Tool Turret with 2 Indexing Stations, 40" x 50" Sheet Size Ball Transfer Table with Automatic Sheet Re-positioning, Auto-load System, (Auto-load non functional, machine value only)

Salvagnini Panel Bender (1998)

  • Model #: P2.L1.LS.CLA (SO)

  • Specifications: 5" Flange Height, 14ga M.S. 18ga S.S. Max 1.8M Bend Length

Salvagnini Panel Bender (1998)

  • Model #: P-4 2112 LIV ISK SCDV

  • Specifications: 82" x 59" Capacity Panel Bender (1993) 5" Bending Height, .098 Max. Thickness, Control Panel, Full Fence Safety Enclosure (NEEDS REPAIR)



​Turret Punches

  • Amada 304050NCT PEGA-345 30-Ton CNC Turret Punch (1993) with Amada 04PC CNC/CRT Control, 58-Station Pick Turret with (2) Auto Indexing Positions, Ball Transfer Table, Automatic Sheet Positioner with Dual Grippers, Slug Conveyor

  • Amada 304050NCT PEGA-345 30-Ton CNC Turret Punch (1994) with Amada 04PC CNC/CRT Control, 58-Station Pick Turret with (2) Auto Indexing Positions, Ball Transfer Table, Automatic Sheet Positioner with Dual Grippers, Slug Conveyor

  • Amada 304050NCT PEGA-345 30-Ton CNC Turret Punch (1994) with Amada 04PC CNC/CRT Control, 58-Station Pick Turret with (2) Auto Indexing Positions, Ball Transfer Table, Automatic Sheet Positioner with Dual Grippers, Slug Conveyor

  • Amada 304050NCT PEGA-345 30-Ton CNC Turret Punch (1990) with Amada 04PC CNC/CRT Control, 58-Station Pick Turret with (2) Auto Indexing Positions, Ball Transfer Table, Automatic Sheet Positioner with Dual Grippers, Slug Conveyor​


Press Brakes

  • Amada RG-50S 50-Ton x 6' CNC Hydraulic Press Brake (1996) NC9-EXII Programmable Back Gauge, Light Curtain

  • Amada RG-35S 35-Ton x 47" OA CNC Hydraulic Press Brake (1990) with Amada NC9-EX II Programmable Back Gauge, Eagle Eye Light Curtain

  • Amada/Promecam HFSO10030-8 100-Ton x 10' OA CNC Hydraulic Press Brake (1998) with Amada Promecam Operator-Type OPC8XT12 CNC/CRT Control with Color Monitor, 8-Axis Back Gauge, 122" OA Bed Length, 106" Between

  • Amada FBD 1030E 110-Ton x 122" CNC Hydraulic Press Brake (1995) with NC9-II CNC Control, 2-Axis Programmable Back Gauge, 100.4" Between Housings​​



  • Niagara E110 110-Ton OBI Punch Press (1974) Eccentric Geared, Air Counter Balance, Air Clutch, With Air Feeds, AF-1 18"x30" Stock Feeder S.N 7628, Cooper Weymouth 18" 7-Roll Stock Straightener, Cooper Weymouth Est. 4,000-Lb. Uncoil Stand

  • South Bend Johnson 100 FW-AC 100-Ton OBI Punch Press (1977) with 4" Stoke, 4" Adjustment, 17.5" Shut Height, 42" L-R x 27" F-B Bed Size, 75 SPM, Air Clutch, Brake and Counterbalance, Rapidair Model KBX1129 Servo Roll Feed with Programmable Con., Est. 4,000-Lb. Uncoil Stand

  • Verson 6B54 150-Ton Straight-Side Double-Crank Punch Press (1950) with 6" Stroke, 6" Adjustment, 16" Shut Height, 54" L-R x 36" F-B Bed Size, 30 SPM, Air Clutch, Brake and Counterbalance, Air Cushion, Windows, Palm Buttons

  • Johnson No. 3 30-Ton OBI Punch Press with Mechanical Clutch


  • Amada S2532 118" x 8' Hydraulic Squaring Shear (1984) with Squaring Arm, Front Supports, Front-Operated Power Back Gauge

  • Whitney-Jensen 7242 16 Gauge x 42" Mechanical Power Squaring Shear (1945) with Motor and Controls

  • Pexto 137K 16 Gauge x 3' Mechanical Foot Shear


  • K.R. Wilson 37B 100-Ton Straight-side Hydraulic Press (1947) with 51" L-R x 31" F-B Bed Size, (2) Hydraulic Rams, Air Cushion, Remote Hydraulic Power Supply



  • Haeger 824-PLUS-1H 8-Ton C-Frame Hydraulic Pemserter (2000) with 24" Throat, Variable Speed Controls, Rotary Bowl-Type Feeder, Digital Parts Counter



  • Di-Acro 6" x 6" Power Corner Notcher with 18" x 24" Work Table, Motor, and Controls

  • Amada CS-220 8.5" x 8.5" Corner Notcher with Timer, One Shot Lube System, Motor and Controls

  • Di-Acro 6" x 6" Bench-Top Manually-Operated Corner Notcher with 18" x 24" Work Table, Motor, and Controls



  • Clausing Colchester 17" x 80" Toolroom Engine Lathe with 20-1600rpm, Inch Metric Threading, 12" 3-Jaw Chuck, Quick Change Toolpost, 15" 4-Jaw Chuck, Steadyrest

  • Clausing Colchester VS12 12" x 36" Toolroom Engine Lathe with 60-2500rpm, Inch Metric Threading, 6" 3-Jaw Chuck, Quick Change Toolpost, Chip Pan


  • Amada TOGU-III Die Grinder (2004)

  • Amada TOGU-III Die Grinder (2004)


Manuel Brakes and Rolls 

  • Di-Acro 24" Bench-Top Mechanical Finger Brake

  • Di-Acro 12" Bench-Top Finger Brake

  • Di-Acro Approx. 22 Gauge x 2' Bench-Top Power Pinch Roll with Morse Cobra Gear Reducer with Baldor 1/3-Hp Motor

  • Di-Acro 24P 24" Bench-Top Powered Pinch Roll


  • Bridgeport Series 1 1-Hp Vertical Milling Machine (1957) with 9" x 42" T-Slotted Table, Servo Table Feed, Kurt 6" Vise


  • Jet JDP-20MM Drill Press 

  • Clausing 2274 20" Variable-Speed Drill Press () with Adjustable T-Slotted Work Table, 150-2000rpm, 1.5-Hp Motor

  • Delta Rockwell 17-600 17" Single-Spindle Drill Press Pedestal-Type



  • Di-Acro Houdaille No. 2 Manual Single-End Punch C-Frame

  • Whitney-Jensen 12" Single-End Mechanical Punch C-Frame, with Mechanical Clutch, Motor and Controls

  • Whitney-Jensen 18" Single-End Mechanical Punch C-Frame, with 28" x 40" Table, Mechanical Clutch, Motor and Controls

  • Whitney-Jensen 811 Single-End Manual Punch Mounted on Cabinet Base



  • K.O. Lee 6" x 18" Hand-Feed Horizontal Surface Grinder () with 6" x 18" Permanent Magnetic Chuck, Coolant

  • Okamoto ACCU-820ST 8" x 20" 3-Axis Hydraulic Surface Grinder (1998) with 8" x 20" Electromagnetic Chuck with Neutrofier, 8" x 1" Wheel Size, Remote Coolant System with Magnetic Separator, Incremental Downfeed



  • Powermatic 87 20" Vertical Bandsaw with Built In Blade Welder and Grinder, AC Motor Controls

  • Kysor Johnson J Horizontal Bandsaw with Manual Clamping, Coolant



  • Virtek Laser QC LPS-1DS Laser Inspection Machine (2006) Said to be function but not using

  • Amada Fabrivision Laser Inspection Machine (2005) with Fabrivision/Metalsoft, 51" x 51" Glass Surface

  • Faro C-12 QC Portable Digital Measuring Arm (2012) with CPU with Software

  • Fowler/Trimos 600 24" Electronic Digital Height Gauge with Touch Pad Control, LED Display




















Payment Due Date: Invoices must be paid in full within 24 hours of the closing date and before removal of any of the assets of the sale unless otherwise specified. No assets will be released until invoices are paid. 

Accepted Payment Forms: All deposits and balances due shall be payable to the order of HYPERAMS, LLC.  All payments must be made by Cash, Cashier's Check, Wire Transfer or Company Check with Bank Letter of Guarantee(see below). All sales are in U.S. Dollars. 

Business/company checks will not be accepted without a letter of verification from your bank similar to the example illustrated below:

(Bank Name) unconditionally guarantees payment to HYPERAMS, LLC from (Company Name) up to the amount of __________. This guarantee will be valid for purchases made at the auction of (Auction Name) on (Auction Date).

Buyer's Premium: HYPERAMS imposes a buyer's premium on any goods sold to help defray auction expenses. The buyer's premium is a reflected as a percentage that is added to the final purchase price of any item. Rates vary depending on the auction, but are generally between 15% and 18%.  

Final Sale Notice: All assets are being sold “AS IS, WHERE IS” and buyers acknowledges they have inspected all assets prior to bidding. While all care was taken in gathering information on the equipment that is for sale, HYPERAMS will not be held responsible for the correctness of the descriptions. As such, HYPERAMS recommends buyers, if able, to inspect items before purchasing.  All persons are inspecting, bidding and removing assets at their own risk and liability without recourse on HYPERAMS.

Sales Tax: Buyers must pay all sales, export, use and other taxes due to any federal, state or local taxing authority on their purchase. To receive the benefit of any tax exemption, the buyer must supply HYPERAMS with a sales tax exemption certificate. HYPERAMS has provided downloadable sales tax exemption certificates for buyers: 




Removal and Shipping Responsibility: The Buyer is solely responsible to provide any personnel, equipment, or material needed to pick up purchases and shall assume all responsibility for the removal of any item purchased at the sale. The Buyer is required to remove within the stated time frame which is on their invoice unless prior arrangements have been made in writing and approved by the Auctioneer.

Insurance Certificates: Buyers may remove assets themselves or hire any rigger company that they so choose. Buyers, or their riggers, must provide the Auctioneer and the owner of the premises of the sale a certificate of insurance in amounts acceptable to the Auctioneer prior to removal of any Lot. On small lots which are considered "hand carry," no insurance is needed.

Removal Dates: TBD. Items will be considered abandoned, and buyer shall lose all rights to said equipment without recourse or refund due from the Auctioneer after the removal deadline.

HYPERAMS has provided a list of local rigging companies that have expressed interest in assisting with removals for this auction. The following list is a courtesy only; buyers may choose to pick up lots themselves or hire the rigging company of their choice with proper insurance certificate (see above regarding insurance certificates): 

American Rigging Service

Scott Anderson


815-494-9361 cell  



Birmingham, MI 48009

Contact: Ron Lech, President

248-672-0121 or 947-517-4184

Rigger Note: We have our 30,000 sq. ft. warehouse available for storage, free for 60 days if we do the rigging & trucking.


Used Amada Equipment Installer;

Lapis Service Inc.

Danny Kwiatkowski


219-929-8111 cell

Sign Up for Auction Updates

Memberships & Affiliations:

1501 N Michael Drive

Wood Dale, IL 60191


(847) 499-7049



Connect With Us

© Copyright

  • w-facebook
  • LinkedIn Clean
  • Twitter Clean
  • YouTube Clean