top of page

Complete Auction of Plastic Film and Bag Manufacturing Facility in Waukesha, Wisconsin

AUCTION DETAILS

Type of Auction:

Online Only  

​

Auction Date and Time:

April 6, 2017; 10:00 AM CST (Starts Closing)

​

Inspection Date and Time:

April 5, 2017; 9:00 AM - 4:00 PM CST

​

Removal Dates:

April 2017; TBD

​

Location:

1203 S. Grandview Blvd.

Waukesha, WI 53188

Map and Directions

​

Type of Assets/Lots:

Over 200 lots of plastic film and bag manufacturing equipment, including Egan 3.5" blown film  lines and Davis standard blown film lines See Lot Book on Bidspotter for complete asset listing and photos.  

​

Payment Information:

Payment is due within 24 hours. Cash, wire transfer, cashier’s check, or company check with a bank letter of guarantee are all acceptable forms of payment. 

​

Buyers Premium:

An 18% premium will be applied to purchase total. 

Lot Book and Auction Platform:

Lot Book and online auction provided by Bidspotter. View lot book and register to participate in the online auction here.

​

Auction Contact:

For questions regarding assets or auction registration, please contact Director of Auction Services Burdette Wilber at (314) 616-8422 or bwilber@hyperams.com.

FEATURED ITEMS

Featured Items

TOP

(2) Egan Blown Film Lines

Complete bag lines being offered as a whole or subject to piecemeal bids 

​​

(1) Davis Standard Bag Line

Complete bag line offered as a whole or subject to piecemeal bids  

SAMPLE ITEMS | SEE LOT BOOK FOR FULL LISTING

TOP

  • Dewalt 1 1/2in rotary hammer drill  S# 005169

  • Bosch rotary hammer drill  M# 11236US  S# 787002415

  • Milwaukee sawzall plus with one inch stroke S# 985A399061859

  • Milwaukee 1/2in magnum drill  CAT# 0234-75  S# 987A599141857

  • Two pneumatic sanders

  • Dewalt reciprocating saw 1 1/8in stroke  M# DW304P

  • Skilsaw circular saw 7 1/4in blade  M# 5840

  • Two Milwaukee magnum drills  3/8in S# 065A506410283  1/2in S# 070A507281660

  • Two grinders  Bosch 4 1/4in  M# 1810PS - Metabo 6in  M# 01451420

  • Dremel rotary tool  M# 300

  • Assorted tooling, such as wire strippers, screwdrivers, hammers, vise grips, sockets, snips and channel locks, wrenches, pipe cutters, etc. 

  • Mitutoyo digital gauge with printer readout

  • Metek surface speed wheel tester  M# 1726

  • Two Mitutoyo flat anvil dial thickness gauges

  • Brown and Sharpe table top measurement tool

  • Multiple micrometers

  • Set of telescoping gauges

  • Starrett magnetic dial indicator

  • Exergen infrared temperature meter  M# 5730  S# 1364

  • ID Pal labeler  M# PAL-750-439YL

  • Drill Doctor drill bit sharpener  M# 500

  • Assorted milling, drill, tap and die, and lathe bits and tools 

  • Pry bars, measuring tapes, chisels, putty knives

  • Two electrical testers and one laser detector

  • Soldering gun

  • Bimba pneumatic actuators

  • Two pipe benders, sledge hammer, three clamps

  • Ellis Drill press 16in x 18in table with vise, variable speed control, foot pedal  M# 9400  S# 94D06443

  • Enco milling machine with auto control and Acu-Rite digital readout, 54in x 10in work surface  M# 00684266  S# 460322  

  • Enco lathe with power feed, three jaw 10in chuck, steady rest, extra 12in four jaw chuck, 3 1/4in hole through center, 16in swing, 82in x 13in bed, 60in between centers  M# ENCO111-1650  S# 041122  

  • Skilsaw table saw, 10in blade, angles up to 45 degrees, 17in x 27in work surface, dust bag collector  M# 3400

  • Ellis band saw, blade size 10in x 1in x .035, Capacities-7in round at 45 degrees, 10in round at 90 degrees, 11in flat at 90 degrees  M# 1600  S# 16061958

  • Millermatic 251 wire welder with tank gauges and wire gun, 200amp  28v  60% duty cycle  max ovc 38  S# LG431600B

  • 5500lb pallet jack 27in wide forks

  • Wesco lift with plug in rechargeable battery, 1000lb capacity, 19in x 25in forks, M# PESFL-76-25  S# 181523  Mfg. date 2008

  • Welding tank cart with gauges and torch gun

  • Arpac automatic shrink wrapper, 5ft diameter surface, 4000lb capacity  M# PAT-4006-L  S# 11769  Mfg. date 2/2010

  • Fairbanks 500lb beam scale

  • 4ft x 4ft floor scale with Rice Lake digital readout

  • CM Valuestar 1/2 ton electric hoist 

  • 1 ton chain hoist with clamp and extra chain plus cable rachet

  • Caterpillar 5000lb fork truck  M# GC25K  S# AT82C06383  8,092 hours  LATE DELEVERY AT END OF CHECKOUT

  • Metal and wood work benches and desks

  • 24 volt machine clutches

  • Morse Raider worm gear reducer  M# 375Q140H60

  • Leeson 1/3hp motor with Morse Cobra gear reducer

  • Control Techniques servomotors

  • Hailea air compressor  M# ACO-420

  • Assorted small servo and gear motors

  • Five gear reducers, one Reliance and four Morse Cobra

  • Three JRC Web Accessories 1 1/2in thru bore mechanical chucks

  • Atlas Copco air compressor and tank  5hp  14.2 cfm air delivery  Mfg. date 1999

  • Electric cables, heater rods and Sylvania transformer 51kva  3ph  460v  S# 1438669.13-3

  • Aetek handheld and overhead ultraviolet system for curing ink, varnishes, laminating adhesives and coatings  M# UPW120134 &  M# PC-HH-3007120

  • Cushion air pillow machine  M# AP-800C

  • De-Sta-Co conveyor parts

  • Boston worm gear reducer, small transformer, two servomotors and miscellaneous electrical components

  • Shop cart with socket head bolts, nuts and washers

  • Metal shelves with miscellaneous control drives, pneumatic actuators, electrical cables, fuses, electrical components, gears, collars, nuts, bolts, flex cable, socket head bolts, steel cart wheels, electrical conduit parts, brass and copper fittings, washers, pvc and metal pipe fittings, air filters

  • Two drums of scrape aluminum and steel pipes and bars

  • Rack with scrape aluminum and steel pipes and bars

  • Steel beams 18 to 20ft lengths

  • Wood shelf and work bench with small parts cabinets of nuts, bolts, washers, electrical terminals, fittings, drill bits, tapers, reamers, o-rings, tab and dies

  • Multiple sections of pallet racking, NO CONTENTS

  • Complete bag line-- Lot is being offered as a whole subject to piece meal bids of lots 125-131 & 135----3.5in Egan Model 3518-H extruder, 150Hp, Water-Cooled, 30:1 LD Ratio, 16.94:1 Gear Reducer, Electrical Control Panel, and Manual Screen Changer; AEC Model BD-500 5-Component Gravimetric Blender, with Vacuum Receivers, 500Lbs./Hour Capacity (2006); Gloucester 12" (0.90" Die Gap) Rotating Die Mounted on Cart; Alpha-Marathon Dual Lip Air Ring with 25Hp AC Blower and Variable Drive; Primary Pneumatic Operated Nip Rolls 72" with Chrome and Rubber Roller, DC Motor Driven; Secondary Pneumatic Operated Nip Rolls 72" with Chrome and Rubber Roller, DC Motor Driven; Pillar Model HVXEMR Double Sided Treater, SN 217592, 3,500 Watts with 2 Power Supplies and Control; Fife Single Roll Edge Guide; Hobbs 84" Dual Turret Winder 3" Air Shafts and Static Eliminator

  • 3.5in Egan model 3518-H extruder, water cooled, 30:1 ratio, 150hp DC motor, 16.94:1 gear reducer, electrical control panel and manual screen--Lot is being offered individually subject to totality bid of lot 124

  • Alpha-Marathon dual lip air ring with 25hp AC blower and variable drive, 12" Gloucester rotating die (.90" die gap) mounted on cart--Lot is being offered individually subject to totality bid of lot 124

  • AEC model BD-500 five component gravimetric blender with vacuum receiver, 500lbs per hour capacity Mfg. date 2006--Lot is being sold individually subject to totality bid of lot 124

  • Blower motor unit with chiller radiator tank for air ring--Lot is being offered individually subject to totality bid of lot 124

  • 72" Primary pneumatic operated nip rolls with chrome and rubber rollers driven by DC motors, collapsing wood frame, Pillar Model HVXEMR double sided treater  S# 217592, 3500 watts, with two power supply's and controls--Lot is being offered individually subject to totality bid of lot 124

  • Fife single roll edge guide with custom built slit station--Lot is being offered individually subject to totality bid of lot 124

  • 72" secondary pneumatic operated nip rolls with chrome and rubber rollers driven by DC motors--Lot is being offered individually subject to totality bid of lot 124

  • 84 " Hobbs dual turret winder, 3" air shafts and static eliminator--Lot is being offered individually subject to totality bid of lot 124

  • Steel platform, framework & stairs only--Lot is being sold subject to totality bid of lot 124

  • Complete bag line, Lot is being offered as a whole subject to piece meal bids of lots 137-148--Davis Standard M# 35IN35-24 3.5" extruder  100Hp, Air-Cooled, 24:1 LD Ratio, Gear Reducer, Electrical Control Panel, and Manual Screen Changer; AEC Model BD-500 5-Component Gravimetric Blender, with Vacuum Receivers, 500Lbs./Hour Capacity (2006); 6" (0.065" Die Gap) Rotating Die Mounted on Sano Cart; Film-Master Air Ring with 15Hp AC Blower and Variable Drive; Collapsing Frame, Wooden Slat Construction; Sano Model UN44 400 Primary Pneumatic Operated Nip Rolls SN 12.1617.49 (1989) 44" with Chrome and Rubber Roller, DC Motor Driven; Secondary Pneumatic Operated Nip Rolls 44" with Chrome and Rubber Roller, DC Motor Driven; Pillar Model DB4567-5 Single Sided Treater, SN 43795-1, (2007), 3,500 Watts with 2 Power Supplies and Control; Fife Two Roll Edge Guide; 54" Sano dual turret winder M# DTW54  S# 43795-1  1 1/2hp 3" air shafts3.5" Davis Standard extruder M# 35IN35-24, air cooled, 24:1 LD ratio, 100hp DC motor, with control panel and manual screen changer--Lot is being offered individually subject to totality bid of lot 136

  • Film master air ring with 15hp AC blower and variable drive, 6" rotating die (.065 die gap) mounted on cart--Lot is being offered individually subject to totality bid of lot 136

  • AEC five component gravimetric blender with vacuum receivers  M# BD-500, 500lbs per hour capacity--Lot is being offered individually subject to totality bid of lot 136

  • Blower motor unit with chiller radiator tank for air ring--Lot is being offered individually subject to totality bid of lot 136

  • 44" Sano M# UN44-400 Primary pneumatic operated nip rolls, S# 12.1617.49 with chrome and rubber rollers driven by DC motors, Pillar single sided treater M# DB4567-5  S# 43795-1, 3500 watts with power supply--Lot is being offered individually subject to totality bid of lot 136

  • 44" Secondary pneumatic operated nip rolls with chrome and rubber rolles driven by DC motors with Fife two roll edge guide--Lot is being offered individually subject to totality bid of lot 136

  • 54" Sano duel turret winder M# DTW54  S# 43795-1,  1 1/2hp, 3" shafts--Lot is being offered individually subject to totality bid of lot 136

  • Control panel--Lot is being offered individually subject to totality bid of lot 136

  • Control panel--Lot is being offered individually subject to totality bid of lot 136

  • Hitran Transformer  20kva  3ph  60hz  460v  250lbs  M# D3002042H6  S# MM31390-31219--Lot is being offered individually subject to totality bid of lot 136

  • Control panel--Lot is being offered individually subject to totality bid of lot 136

  • Steel platform, framework & stairs only--Lot is being offered individually subject to totality bid of lot 136

  • Complete bag line being offered as a whole subject to piece meal bids of lots 150 to 155 & 158 to 161--- 3.5" Egan Model 3518-H extruder, 125Hp, Water-Cooled, 24:1 LD Ratio, 16.94:1 Gear Reducer, Electrical Control Panel, and Manual Screen Changer; AEC Model BD-500 5-Component Gravimetric Blender, with Vacuum Receivers, 500Lbs./Hour Capacity (2006); 10" (0.90" Die Gap) Rotating Die Mounted on Cart; Alpha-Marathon Dual Lip Air Ring with 15Hp AC Blower and Variable Drive; Collapsing Frame, Wooden Slat Construction, Removal Gusset Blades; Sano Model UN54-1 Primary Pneumatic Operated Nip Rolls SN 12-416-03 (1978) 54" with Chrome and Rubber Roller, DC Motor Driven; Secondary Pneumatic Operated Nip Rolls 54" with Chrome and Rubber Roller, DC Motor Driven; Pillar Double Sided Treater, with 2 Power Supplies and Control; Coast Controls Edge Guide; Sano Model DTW54 54" Dual Turret Winder SN 43795-1, 3" Air Shafts; and Cincinnati Model MCA-15-41HB Chiller SN 3932A03-93-2

  • 3.5" Egan Model 3518-H Extruder, water cooled, 24:1 LD ratio, S# 9521666, 125hp Reliance DC motor, 16.94:1 gear reducer with control panel and manual screen changer--Lot is being offered individually subject to totality of bid of lot 149

  • Alpha-Marathon dual lip 10" air ring Cat# 200901-01 with 15hp blower and control drive, 10" Rotating Die (.090 gap) mounted on cart--Lot is being offered individually subject to totality bid of lot 149

  • AEC model BD-500 five component gravimetric blender with vacuum receiver, 500lbs per hour capacity Mfg. date 2006--Lot is being offered individually subject to totality bid of lot 149

  • Blower motor unit--Lot is being offered individually subject to totality bid of lot 149

  • 20hp Cincinnati water chiller M# MCA-15-41HB  S# 3932A03-93-2--Lot is being offered individually subject to totality bid of lot 149

  • 54" Sano Model UN54-1 1/2hp primary pneumatic operated nip roller with chrome and rubber rolls, S# 12-416-03 Mfg. date 1978, collapsing wood frame with removable gusset blades, Pillar double sided treater with two power supplies, controls and Coast edge guide--Lot is being offered individually subject to totality bid of lot 149

  • Blow motor unit--Lot being offered individually subject to totality bid of lot 149

  • 54" secondary pneumatic operated nip rollers with chrome and rubber rolls driven by DC motors--Lot is being offered individually subject to totality bid of lot 149

  • 44" Sano Model STW44-400  .5hp single turret winder  S# 12-1517-71--Lot is being offered individually subject to totality bid of lot 149

  • Process control scrap reclaim system M# RFN14  S# 21581008--Lot is being offered individually subject to totality bid of lot 149

  • Complete bag line being offered as a whole subject to piece meal bids of lots 163 to 165--2" Davis Standard Extruder with controls, 40Hp,Hobbs Single Sided Treater M# 20-44BF  S# G-6764, 32" Upper Nips, Wooden Collapsible Frame, Gloucester Air Ring, Fife Edge Guide, 10Hp Blower with AC Inverter, (Not Operational, Needs Parts)

  • 2" Davis Standard Extruder with 40hp drive, gear reducer and control panel--Lot is being offered individually subject to totality bid of lot 162

  • Gloucester air ring with 4" die, 10hp blower with AC inverter mounted on cart--Lot is being offered individually subject to totality bid of lot 162

  • Hobbs single sided treater with chrome and rubber rollers  M# 20-44BF  S# G-6764--Lot is being offered individually subject to totality bid of lot 162

  • Federal Pacific Transformer  30kva  3ph  60hz  480v  315lbs  Cat. # T43T30

  • Slit seal station with hot knife

  • AEC vacuum unloading system with 7.5hp vacuum pump S# 37B056 with AEC VTC 2/20 PLC based controller

  • Multiple Schuld Bushnel stainless steel storage silos with 105,000lb storage capacity, 12ft diameter, 40ft tall with steel frame

  • Square D switchboard  M# F-208859 with six wire runs of approximately 300ft total

  • Gloucester air ring, 12", M# 812  S# 30941-01  Mfg. date 6/87

  • Alpha-Marathon air ring, 10", Cat. # 4083AR2

  • Comp Air L22-9 Rotary Screw air compressor (2006) and Premier air dryer S# 325963 

  • 60" Post gusseter with split station

  • 70" Custom made post gusseter with 3 sets of gusset boards and slit seal station, custom built print press

  • 80" Gloucester bag separator

  • 60" Roann bag separator with stacking table

  • 60" Roann Patriot full servo in line bag machine with electronic print registration

  • 60" Converting Systems servo in line bag machine with registration

  • 50" One color printing press, 2hp DC control with hydraulics and extra rollers

AUCTION GALLERY 

Auction Gallery

TOP

PAYMENTS AND FEES

Payments and Fees

TOP

Payment Due Date: Invoices must be paid in full within 24 hours of the closing date and before removal of any of the assets of the sale unless otherwise specified. No assets will be released until invoices are paid. 

​

Accepted Payment Forms: All deposits and balances due shall be payable to the order of HYPERAMS, LLC.  All payments must be made by Cash, Cashier's Check, Wire Transfer or Company Check with Bank Letter of Guarantee(see below). All sales are in U.S. Dollars. 

​

Business/company checks will not be accepted without a letter of verification from your bank similar to the example illustrated below:

​

(Bank Name) unconditionally guarantees payment to HYPERAMS, LLC from (Company Name) up to the amount of __________. This guarantee will be valid for purchases made at the auction of (Auction Name) on (Auction Date).

​

Buyer's Premium: HYPERAMS imposes a buyer's premium on any goods sold to help defray auction expenses. The buyer's premium is a reflected as a percentage that is added to the final purchase price of any item. Rates vary depending on the auction, but are generally between 15% and 18%.  

Final Sale Notice: All assets are being sold “AS IS, WHERE IS” and buyers acknowledges they have inspected all assets prior to bidding. While all care was taken in gathering information on the equipment that is for sale, HYPERAMS will not be held responsible for the correctness of the descriptions. As such, HYPERAMS recommends buyers, if able, to inspect items before purchasing.  All persons are inspecting, bidding and removing assets at their own risk and liability without recourse on HYPERAMS.

​

Sales Tax: Buyers must pay all sales, export, use and other taxes due to any federal, state or local taxing authority on their purchase. To receive the benefit of any tax exemption, the buyer must supply HYPERAMS with a sales tax exemption certificate. HYPERAMS has provided downloadable sales tax exemption certificates for buyers: 

Removal and Shipping

REMOVAL AND SHIPPING

TOP

Removal and Shipping Responsibility: The Buyer is solely responsible to provide any personnel, equipment, or material needed to pick up purchases and shall assume all responsibility for the removal of any item purchased at the sale. The Buyer is required to remove within the stated time frame which is on their invoice unless prior arrangements have been made in writing and approved by the Auctioneer.

​

Insurance Certificates: Buyers may remove assets themselves or hire any rigger company that they so choose. Buyers, or their riggers, must provide the Auctioneer and the owner of the premises of the sale a certificate of insurance in amounts acceptable to the Auctioneer prior to removal of any Lot. On small lots which are considered "hand carry," no insurance is needed.

​

Removal Dates: TBD. Items will be considered abandoned, and buyer shall lose all rights to said equipment without recourse or refund due from the Auctioneer after the removal deadline.

HYPERAMS has provided a list of local rigging companies that have expressed interest in assisting with removals for this auction, and will have representatives available at the facility on the day of inspection. The following list is a courtesy only; buyers may choose to pick up lots themselves or hire the rigging company of their choice: 

​

Big Red Machinery Movers

3645 W. Elm St.

Milwaukee, WI 53209

Contact:

Dale Kochanik

Cell – 262-894-4420

dale@bigredmovers.com

www.bigredmovers.com 

 

​

bottom of page